Catch Bigger and Better Fish!

How To Put Sinkers On A Fishing Line

How To Put Sinkers On A Fishing Line | Life of Fishing

Written by

Daniel Wade

/

May 28, 2020

When it comes to fishing, you have to place your bait in the perfect spot to catch a good fish. Sometimes, this means using weights to make your fishing line sink to the desired depths. These weights are called sinkers; they are just chunks of metal styled into functional shapes and sizes useful when:

  • Casting – pinch a slip-shot sinker to the fishing line just above the hook to take your bait farther.
  • Bottom fishing – e.g. by dragging a walking sinker behind your drifting boat
  • Using live bait rigs – you can allow the fish to eat the bait before striking.
  • Fishing in a current – using pyramid sinkers to prevent line twists
  • Trolling – using a walking sinker

This article covers:

How to use fishing sinkers

Sinkers are an essential part of your fishing kit. But anglers must confirm the state regulations on those lead weights usage first before getting sinkers. Some states have outlawed the use of small lead weights because they can poison wildlife if ingested.

States that require the use of lead-free sinker substitutes include California, New York, Maine, Vermont, Massachusetts, and New Hampshire. In these regions, you have to lead-based sinkers that are prohibited if their size is under one ounce or small enough that it can be ingested by wildlife.

Other areas that require the use of lead-free sinkers are federal lands and waters. You can use alloys, tine, steel, and tungsten sinkers to fish in these regions.

Not all sinkers are of high-end design. Some anglers have had success taking their baits deeper with bricks, spark plugs and lug nuts. Note, however, that when it comes to situational angling, nothing beats the performance of high-end weights design. The shape, design, and size of the Sinker are what matters.

The take-home, therefore? Choose your fishing sinkers wisely to avoid falling on the wrong side of state lead weights regulation. Additionally, sinkers come in different weights and styles for a reason. Buying a sinker should not just be a matter of necessity; the weight, shape, and manner in which you rig the Sinker determine your success in the waters. Here’s a look at various sinker style and when to put sinkers on fishing line:

Common styles of sinkers used by anglers

As mentioned before, sinkers come in various shapes and sizes to suit specific fishing techniques. These specifications determine where you are going to put the Sinker on your fishing line. The most common sinkers used by anglers are listed below:

Split-Shot

The simplest type of Sinker. They are lightweight, small, and with a slit, right in the middle, so they can be pinched on and off the fishing line with fingers or by use of pliers. Use slip-shots with live baits; slip shots are suitable for most light tackle fishing needs. You can get reusable and non-reusable split-shots. Split-shot sinkers with ears or wings are the best for quick rigging using pliers.

You can also use a single or a series of split-shot weights along the fishing line or dropper line. Split-shots are the most versatile types of sinkers. They can be used in conjunction with other sinkers to take the bait deeper. They can be fastened onto the lure, swivel, or used to stop a larger sliding weight.

How to rig a split-shot

Start by securing the bobber to the leader just under a knot. Note that the length of the leader depends on the water depth, water clarity, and the desired bait position. Next, secure slip shot to the leader just a few inches above the bait then pinch to close and secure with pliers.

Note, however, that while it is easy to pinch soft lead split-shots, it can damage your line. Also, using a single larger split-shot is better than using a series of them along the mainline as this can result in tangles.

Buy split-shot sinkers on Amazon >>

Rubber core

Rubber core sinkers are elongated weights with a rubber-coated slot where you insert the leader then twist the rubber core to secure the line in place. The advantage of rubber core sinkers is that they can be added or removed quickly without any damage to the fishing line.

When to use rubber-core weights

Use rubber core sinkers when you need weights larger than slip-shots. But avoid using rubber-core when fishing in rocky bottoms or near shell bars as they tend to jam in these areas. Other alternatives to rubber-core sinkers include dog-ear weights and clasp-on weights.

Buy rubber core sinkers on Amazon >>

Slip sinkers

Slip or sliding sinkers include the egg, worm weight, and barrel sinkers. They have a hole bored through their centers. Just run your line through the hole and tie the end to a barrel or swivel. Add a length of leader line from the other end of the barrel/swivel to your hook or bait. You can add a plastic bead between the slip sinker and the swivel to protect the knot from unraveling during fishing. Slip sinkers are simple fish finders useful for trolling or drift fishing. They help to keep the line from twisting in currents.

Here’s where to put a basic knocker rig with an egg sinker. Remember to use live bait with this setup. A basic knocker rig with an egg sinker setup is suitable for bottom fishing at the reefs and wrecks. Start by threading line through the Sinker then attach the hook a few inches below the Sinker. The Sinker should be able to slide freely.

Buy slip sinkers on Amazon >>

Drop Sinkers

Drop sinkers are also known as bell sinkers. They are useful for drop-shotting, where you tie the hook/lure above the weight. Drop sinkers have a lopped wire attachment at the top where you fit the fishing line without the need for knots. This way, you can change the weights quickly to fish at different depths.

When to use drop-shot sinkers

Use drop-shot weights during straight down presentations to keep your bait a certain distance above the bottom.

How to rig a drop shot sinker

Just tie a drop-shot hook to your fishing line; a Palomar knot will do. Ensure you leave a long tag line where the Sinker is going to be attached.

Expert advice when drop-shotting

Always pull your fishing line taut after the weight touches down. Gently shake the fishing line, drop the tip of the rod, and allow the lure to free-fall slowly towards the bottom.

Buy drop sinkers on Amazon >>

Bank sinker

A bank sinker is made for deep dropping; it keeps the weight on the bottom. A bank sinker is just a simple chunk of lead with a tapered end through which a hole runs.

Rigging a bank sinker

The bank sinker has to be set up such that it stays on the bottom, and your hook stays off the bottom. So, thread through the line and place your hook right above the Sinker.

Other substitutes for bank sinkers include the pyramid sinker, which is a four-sided piece of lead shaped into a pyramid such that it’s pointy on one end. Pyramid sinkers do not tumble in the current. Then there’s a dipsey sinker, a rounded sinker with a twisted wire loop on one end where you attach your fishing line.

Buy bank sinkers on Amazon >>

Worm Weights

Worm weights are also known as bullet sinkers. A worm weight is a piece of lead, shaped into a cone and a hole bored through its center.

When to use worm weights

Worm weights are excellent when fishing bass fishing using soft plastic lures in freshwaters. Worm weights cone-like shape slides well through obstructions carrying your bait through weeds without fouling.

You can use a worm weight as a sliding sinker, just as in the case of the egg sinker. Use the sliding worm weight when going for a Carolina rig. You can also make it work like a jog by pegging it to the head of your plastic bait using a toothpick.

Both the pegged and the sliding worm weight have their tie and place. The unpegged worm weight is suitable for when deep fishing in open waters that is not heavily covered. Use it to tempt witty fish that tend to shy away from baits that have weights attached. The pegged worm weight is useful for when fishing in shallow and thick covered water. Pegging can be done using a toothpick and screwing the case of screw-in bullet weight.

Buy worm weights on Amazon >>

Walking Sinker

Walking sinkers are available in lead or steel either as banana-shaped or lindy-style models. They are useful for presenting live baits to the North American pikeperch. They are designed for use when slow-trolling or drifting as they can be dragged along the bottom.

How to rig a walking sinker

Thread your line through the sinker hole then tie a barrel swivel onto the line. Run a leader on the other side to the hook.

Banana-shaped walking weights are the best; they do not get snagged easily.

In summary, to make your bait sink to the desired depth, you have to tie or clamp a sinker at the right spot on your fishing line. Learning when and where to put weights on your fishing line is essential. Do it carelessly, and it will compromise the presentation of your bait, then bang goes any fond ideas of landing a trophy game fish. Sinkers come in various styles and weights. Therefore, get a sinker that is suitable for the water depth, bait size, and strength of the current.

Buy walking sinkers on Amazon >>

Next Post >>

Home /

How To Put Sinkers On A Fishing Line

Next Post >>

Most Recent

Similar Posts You Might Like

ABOUT US AT LIFE OF FISHING

Our mission here at Life of Fishing is to produce the most helpful, easy-to-read fishing content possible. The hope is that we can all increase our fishing knowledge though this site. Be sure to come back; we publish multiple times every week!

SUBSCRIBE TO
LIFE OF FISHING

CONTENT, NEW RELEASES & REVIEWS

Thank you! Be sure to check your email!
Something isn't right. Try to submit your email again.

Enjoying our fishing content? You may be interested in our other outdoor articles:
Life of SailingToday I'm Outside

Lifeoffishing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

© 2020 Life of Fishing
StatesCategories | Posts
Contact UsTerms & Conditions | Privacy Policy