Catch Bigger and Better Fish!

How To Fish The Tides

How To Fish The Tides | Life of Fishing

Written by

Daniel Wade

/

April 6, 2020

Being aware of the tides and how they interact with the bottom topography is of great importance if you’re looking to make some good catch. Well, that’s because tides have a huge impact on the water and can be the difference between a successful outing and a completely unproductive one.

Knowing the various fishing techniques and how to apply them is crucial if you want to be successful out on the water. The best thing about fishing techniques is that they’re easy to master. Unfortunately, even the most experienced anglers will agree that the fishing techniques will go down the drain if you do not understand how to fish the tides. Simply put, it’s important to understand various tidal changes and how they affect fish feeding behaviors and movements.

Learning how to fish the tides is all about understanding how tidal deviations influence fish feeding and movement. This is of immense importance given that being at the right place at the right time is, without a doubt, one of the most crucial parts of a fruitful fishing trip. Normally, fish will move with the tides so that they can feed at locations that give them easier access to food or prey. So without understanding the tides and how they affect fish movements and feeding activities, you’ll only be doing guesswork and you cannot be assured of a successful catch.

This piece, therefore, goes into detail about the tides and how to use them to your advantage.

This article covers:

Things to Know about Tides

It’s important to learn some key concepts about the tides if you’re going to get the most out of your fishing trip.

Tide – This is essentially the movement of water level. It’s caused by a wide range of factors such as the gravitational movements of the Earth, the Sun, and the Moon. These factors combine to make the water levels to rise or fall, which then affect the movement and feeding activities of the fish.

High Tide – This is the highest point of the water level. High tides generally flood structures such as oyster beds, jetty rocks, pilings, and seagrass.

Low Tide – This is the lowest point of the water level. It generally reveals the above-mentioned structures.

Rising Tides (Incoming Tides) – These often refer to when the water level is going up.

Falling Tides (Outgoing Tides) – They refer to when the water level is going down.

Slack Water – This is a short period of time when the tides stop and are neither rising nor falling.

What Causes Tides?

Let’s expound more on how the gravitational movements of the Earth, the Moon, and the Sun cause tides.

Gravitational Forces of the Moon

The gravitational forces of the moon practically pull the water on Earth, which principally causes high tides in the Earth’s water bodies such as the ocean, seas, lakes, and even rivers. Similarly, these gravitational forces will pull the Earth on the other side and in turn pull the Earth away from the water bodies to cause low tides.

And given that the Earth naturally moves 180 degrees in 12 hours while the Moon rotates the Earth just about 6 degrees after every 12 hours, this means that there will be high tides and low tides in most water bodies after every 12 hours and 25 minutes.

The Moon is Closer to the Earth than the Sun

The fact that the moon is closer to the Earth than the Sun also affects the tides. But when the Moon and the Sun are in sync, they can cause some of the biggest or smallest tides on Earth. In other words, the levels of the tides will largely depend on the position of the Moon with the Sun.

For example, most water bodies will experience some of the biggest tides when the Moon and the Sun are in line. On the contrary, there will be some of the lowest tides when the Moon and the Sun are opposite each other. This means that most water bodies will experience very high tides after every 27 and half days since that’s when the Moon’s orbit is much closer to the Earth. Simply put, the tides are generally high when there’s a full moon and very low when there’s no Moon (when the Moon is far from the Earth).

You should also keep in mind that it will always take 12 hours for the tides to change from low to high and vice versa.

How Tides Affect Fishing

Tides play a crucial role, especially in saltwater fishing. The main relationship between the tides and water bodies is all about the water levels. In most cases, water levels determine the feeding activities and movement of fish. Water levels affect how various fish species group together, how they feed, and where they feed, and when they feed. For this reason, it’s important to understand how tides work and use them to your fishing advantage.

In essence, tides produce currents or movement of water. As such, the water currents play a crucial role in sweeping small marines, plants, and other fish prey. Instinctively, the fish take advantage of these currents to move and gather where they’re most likely to get food in abundance.

Rising Tides

As we’ve noted numerous times, understanding the tides is very crucial if you want to be successful in tide fishing. When high tides occur, the first and most important clue as an angler is that water will flood the marshes. It will cover large acres, two feet or deeper. Plants, oysters, shrimps, crabs, small baitfish, and other prey marine life will almost naturally get swept to the shallows. And in a movement almost akin to the domino effect, larger and predatory fish such as flounder, redfish, trout, and drum will also flow with the rising tides or follow in hot pursuit to feed on the baitfish in shallow waters.

With this in mind, it’s advisable to target shallow waters when there are high tides or rising tides. If you’re fishing in the ocean, you can target a bay mouth point or the shores. This is because the rising tides will push hard against these areas and bring with them an abundance of baitfish and sport fish. If you’re fishing in estuaries or rivers, it’s important to target creeks or deeper holes. This is because fish will be concentrating in the tidal inflow areas in creeks and deeper holes.

You should, therefore, consider starting your fishing adventures upstream when the tides are high and target fish that are moving to the shallows. In short, inshore locations can be superb fishing points during rising tides. You should also keep in mind that rising tides are some of the best fishing tides as long as you correctly choose your locations. In most cases, high tides will have more oxygen and low temperatures, as well as clearer waters than when the tides are low.

Falling Tides

The water levels will generally diminish and come offshore and marshes as the tides begin to fall. The fish will naturally sense the dropping water levels and will move to deeper waters with the tides. These falling tides mean that you should target deeper areas with more water.

Again, you should focus on the mouth of the estuary, channels, and creeks when the tides are falling. The main idea behind this is that game fish will wait at these points to eat crabs, baitfish, and oysters as they are carried with the current back into deeper waters. You can also try fishing on structures such as pilings and jetties when the tides are falling given that game fish will camouflage in these structures as they wait for the prey to be carried out of the rising tides from the estuaries.

To this point, it’s easy to see that rising and falling tides are among the best time to fish. The fish will be generally active during these moments. You can consider fishing in shallow waters when the tides are high because that’s where there will be a huge concentration of fish. Differently, you can target deeper areas when the tides are low as fish will tend to move from the shallow waters.

Slack Water

As we noted earlier, this is the period of time between low and high tide. Given that fish tend to move a lot with current, they’ll not move that much when there are no tides. This is because baitfish and other marine life are conserving their energy and will rarely move in search of food. If anything, many fish will burrow into the sand or mud and will not actively feed during the slack period.

As such, you may leave empty-handed if you target fish during slack periods. In other words, it’s very challenging to catch fish when water is slack. This is perhaps the best time to take a rest, organize the tackle, refuel your body and wait for the tides.

Conclusion

To this end, it’s important to note that fishing at low or high tides may not be the best time to fish. The idea here is that there won’t be any movement in the water for several minutes or hours and it may be difficult to know where the fish are. However, you should target when the tides are falling or rising (when there’s current) as these are some of the best times to fish. Just position yourself at the right places at the right times and you be able to hit big.

Next Post >>

Home /

How To Fish The Tides

Next Post >>

Most Recent

Similar Posts You Might Like

ABOUT US AT LIFE OF FISHING

Our mission here at Life of Fishing is to produce the most helpful, easy-to-read fishing content possible. The hope is that we can all increase our fishing knowledge though this site. Be sure to come back; we publish multiple times every week!

SUBSCRIBE TO
LIFE OF FISHING

CONTENT, NEW RELEASES & REVIEWS

Thank you! Be sure to check your email!
Something isn't right. Try to submit your email again.

Enjoying our fishing content? You may be interested in our other outdoor articles:
Learn About SailingLearn About Hiking

Lifeoffishing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

© 2020 Life of Fishing
StatesCategories | Posts
Contact UsTerms & Conditions | Privacy Policy